IH centrifugal pump

IH Stainless Steel Chemical Centrifugal Pump Product Overview:

IH stainless steel chemical centrifugal pump is a single-stage single suction cantilever centrifugal pump, which is an energy-saving product used to replace F-type corrosion-resistant pumps. This series of chemical centrifugal pumps is designed according to the performance, technical requirements, and testing methods of energy-saving pumps, and is used to suction and deliver clean water and liquids with physical and chemical properties similar to water without solid particles. Widely used in industrial, agricultural, urban drainage, fire water supply, etc. For the transportation of corrosive media or media with physical and chemical properties similar to water between 20 ℃ and 105 ℃.

IH stainless steel chemical centrifugal pump product features:

The IH stainless steel chemical centrifugal pump has the advantages of reasonable and reliable hydraulic performance layout, small size, light weight, good anti cavitation performance, low power consumption, easy use and maintenance, and high work efficiency. The IH single-stage single suction centrifugal pump is a horizontal structure, and its structural design can basically meet the installation of all pipelines.

IH type stainless steel chemical centrifugal pump shaft seal type:

Packing seal: The pump cover is equipped with a packing box, which uses soft packing seal. The packing box can be filled with water under certain pressure for sealing cooling, lubrication, and cleaning.

Mechanical seal: There are two types of mechanical seals: single end mechanical seal and double end mechanical seal. A certain pressure of water is introduced into the sealing chamber to flush and rub the two end surfaces, while also providing cooling effect.

The sealing type of the pump adopts packing seal or mechanical seal, which can be applied by the user according to their needs. At the same time, it is allowed to use shaft seal types that are suitable for the sealing cavity size and other structures specified in ISO3069, such as mechanical seals with corrugated pipes and impeller seals.

Structure description of IH stainless steel chemical centrifugal pump:

The IH stainless steel chemical centrifugal pump cover is fixed on the middle bracket through a stopper, and then clamped in the middle through the connection between the pump body and the stopper of the middle bracket. The pump body is axial suction, radial discharge, foot supported, and can be directly fixed on the base. The suspension components are fixed to the middle bracket through a stopper and supported on the base by the suspension bracket. For the convenience of disassembly, an extended coupling has been designed, which allows for maintenance without disassembling the inlet and outlet connecting pipelines, pump body, and motor. Simply remove the middle connecting piece of the coupling to exit the rotor component for maintenance. This is an internationally recognized structural form.

The rotation direction of stainless steel chemical pumps: The pump is directly driven by an electric motor through an extended coupling, and when viewed from the motor end, it rotates clockwise.

IH stainless steel chemical centrifugal pump is suitable for:

The IH stainless steel chemical centrifugal pump can transport medium temperatures ranging from -20 ℃ to 105 ℃. If necessary, a double end sealed cooling device can be used to transport medium temperatures ranging from 20 ℃ to+280 ℃. Suitable for industries such as chemical, petroleum, metallurgy, power, papermaking, food, pharmaceuticals, environmental protection, wastewater treatment, and synthetic fibers for transporting various corrosive or non polluting media similar to water.